Skip to main content

Archer 4K Camera field of View

cam specs for archer says 112 degree field of view, in actual use, i only get 75 degrees. this changes camera placement plan. shouldnt i get 112 degrees?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

4 Answers

Chosen Solution

Block Image

Block Image

Block Image

here are the images of my view. i see what you mean as far as vertical and horizontal. i still dont think i am getting 90 degrees horizontal. i measured about 75 degrees.

Was this answer helpful?

Score 0

Comments:

also, will you have a more in depth manual for the presidio? one that would explain every option and adjustment to the system. the current manual only shows basic set up. there are so many more setting that could enhance the view if you knew how to use them all.

by

Add a comment
Most Helpful Answer

Guy,

The Archer does use a field of view of 112 degrees. Are you having this issue with only one camera or multiple? If you are getting a reduced field of view please contact our support team @ 877-998-3440 for help, and to potentially process a RMA.

Best Regards,

Update (01/15/2019)


Guy,

Can you please upload an image from your cameras? The camera field is view is measured diagonally.

Horizontal: ~ 91

Vertical: ~47

Was this answer helpful?

Score 1

Comments:

hello, i will have some screen shots soon. thanks

by

Add a comment

Guy,

The field of view horizontally is ~91 degrees. Using a protractor is not how a viewing angle is determined. As a point of reference you may consult the link below for details determining the field of view.

https://en.wikipedia.org/wiki/Angle_of_v...

Best Regards,

Was this answer helpful?

Score 1

Comments:

misleading information

by

Add a comment

hello, multiple cameras are getting the same field of view. with a protractor, situated above the cam, estimated left to right site. only measures 75 degrees. at 90 degrees i could set cams at center of building. with only 75 degrees the cams need to be placed at the corners. is there a setting that could be changed?

Was this answer helpful?

Score 0
Add a comment

Add your answer

GUY will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 177