Skip to main content

3

by Priti Sharma

Introduction

In the event that the location where your color night vision cameras are mounted is too dark, and the night vision image is black, you will need to allow the cameras to switch into standard black and white night vision mode.

  1. From the main screen while viewing the camera you wish to adjust, left click your mouse once for the menu bar to appear.
    • From the main screen while viewing the camera you wish to adjust, left click your mouse once for the menu bar to appear.

    • Select the Image icon.

  2. Click on the Day & Night Mode drop down.
    • Click on the Day & Night Mode drop down.

    • By default Colorful is selected for cameras supporting color night vision.

  3. Select the color mode Schedule
    • Select the color mode Schedule

    • Click Save

Finish Line

Priti Sharma

Member since: 09/21/2017

19,558 Reputation

95 Guides authored

5 Comments

After doing this, how do I set up the “schedule” so that the camera goes to ‘colorful’ during the daytime, and B&W at night??

Thanks,

TBS

TBS - Reply

There is no need to setup a schedule. The “Schedule” option means the camera will automatically switch from Color to Night Vision (Black/White) automatically, based on the available lighting.

Priti Sharma - Reply

Sum of my cams are color at night and sum are not?

James Thompson - Reply

if you swap locations of the cameras does the issue follow the cameras? what are the model numbers of your cameras?

Priti Sharma -

I have a qcn 8028D that qsee sent me. In the dark, you can see the timing running only. ? No picture. QC8816 running the system. Any help? Thanks

julie - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 46

All Time: 4,406