Skip to main content

1

by Q-See

  1. Right-click to bring up the Menu Bar.
    • Right-click to bring up the Menu Bar.

  2. Left click the Menu Button to access the Main Menu.
    • Left click the Menu Button to access the Main Menu.

  3. Click Setup
    • Click Setup

  4. Click Network
    • Click Network

  5. Click on the E-Mail tab.
    • Click on the E-Mail tab.

  6. Fill out the fields.
    • Fill out the fields.

    • Examples shown below are for Google’s Gmail.

    • SMTP Server: smtp.gmail.com

    • Port: 465

    • SSL Check: Check this box for Gmail

    • Send Address: DVR’s “from address”

    • Password: Case-sensitive password for DVR’s email address

  7. Receive Addresses: Enter up to three
  8. Click Test to send a test email to your receiving address(es).
    • Click Test to send a test email to your receiving address(es).

  9. ☑ Attaching Image if you want Snapshots in the emails.
    • ☑ Attaching Image if you want Snapshots in the emails.

  10. Click Apply
    • Click Apply

  11. Click Exit
    • Click Exit

  12. Click Record
    • Click Record

  13. Click the Motion tab
    • Click the Motion tab

  14. In the Trigger column, click on the Setting button for a camera.
    • In the Trigger column, click on the Setting button for a camera.

    • Motion detection - and email alerts - will only occur if the Enable box is checked for that camera.

  15. Select the Email box so the system will send a notification when this camera detects motion.
    • Select the Email box so the system will send a notification when this camera detects motion.

    • The Snap box for this camera is already checked.

    • You can add snapshots from other cameras to your email by checking their boxes as well.

  16. Click OK
    • Click OK

    • Repeat Steps 12-14 for additional cameras

  17. Click Apply to save your settings.
    • Click Apply to save your settings.

  18. Click the Snap tab.
    • Click the Snap tab.

  19. Make desired changes.
    • Make desired changes.

    • Resolution: Selection not available on all systems: CIF (small) or D1 (large)

    • Quality: Higher quality images use more data

    • Snap Time Interval: 1-5 seconds between each image

    • Snap Number: 1-3 images

  20. Click Apply to save your settings.
    • Click Apply to save your settings.

  21. Click Exit
    • Click Exit

    • Snap settings will apply to all cameras on your DVR.

Finish Line

Q-See AG

Member since: 12/13/2017

1,651 Reputation

44 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 17

Past 30 Days: 70

All Time: 958