Skip to main content

v5.0

by Q-See

Introduction

Face Detection is only compatible with Presidio series cameras. Currently only the Archer and Bastion are supported. This function cannot be used at the same time with other VCA functions (people counter, intrusion detection, cross line detection, defocus detection and scene change detection).

  1. From the Main Screen, right click your mouse.
    • From the Main Screen, right click your mouse.

    • Click Menu

  2. Intelligent Mark:  Indicators will appear on the live display as "Smart" events are captured. Check the Intelligent Mark box to enable.
    • Intelligent Mark: Indicators will appear on the live display as "Smart" events are captured.

    • Check the Intelligent Mark box to enable.

    • Click Apply

    • Intelligent Mark is only available on the Helifax NVR.

  3. Select Alarm
    • Select Alarm

  4. Select VCA
    • Select VCA

  5. Select the Camera you want to enable.
    • Select the Camera you want to enable.

    • Check Save VCA Images

    • Click Apply

  6. Click Face Detection
    • Click Face Detection

  7. Choose to  Specify the Detection Area or to use Full Screen
    • Choose to Specify the Detection Area or to use Full Screen

    • Check Intelligent Recognition to have snapshots taken.

    • Specify the Number of Snapshots

    • Adjust the Min and Max Width to specify the size requirements of the facial detection.

    • Using the lowest Min and highest Max will ensure maximum range for Facial Detection.

    • Click Trigger Actions to configure the recording settings.

  8. Buzzer:  System will make a loud buzzer noise when a face is detected.
    • Buzzer: System will make a loud buzzer noise when a face is detected.

    • Send Email: If email notification is configured, an email notification will be sent when a face is detected.

    • Pop-up Window: A pop-up alert will appear on the live screen.

    • Select the Channel(s) to record when a face is detected on this channel.

    • Click OK

  9. Click Start Face Analysis
    • Click Start Face Analysis

    • Click Apply if it is visible.

Finish Line

Q-See

Member since: 09/21/2017

17,793 Reputation

95 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 13

All Time: 563