Skip to main content

1

by Q-See

Introduction

ALL CHANGES ARE APPLIED AUTOMATICALLY.

  1. Click your mouse once anywhere on your screen.
    • Click your mouse once anywhere on your screen.

    • The Navigation Bar will appear.

  2. Select a Channel in Single View.
    • Select a Channel in Single View.

  3. Click Color Setting
    • Click Color Setting

  4. Adjust the Sharpness by dragging the slider.
    • Adjust the Sharpness by dragging the slider.

    • (Dull) 1-14 (Sharp)

  5. Adjust the Brightness by dragging the slider.
    • Adjust the Brightness by dragging the slider.

    • (Darker) 0-100 (Brighter)

  6. Adjust the Contrast by dragging the slider.
    • Adjust the Contrast by dragging the slider.

    • (Lower) 0-100 (Higher)

  7. Adjust the Saturation by dragging the slider.
    • Adjust the Saturation by dragging the slider.

    • (Less Color) 0-100 (More Color)

  8. You may also select a preset Color Mode.
    • You may also select a preset Color Mode.

  9. To setup a custom color setting:
    • To setup a custom color setting:

    • Click Customized

  10. Adjust the camera settings to your preference.
    • Adjust the camera settings to your preference.

    • Once completed, click OK

  11. To set the color changes to a schedule:
    • To set the color changes to a schedule:

    • In the Effective Time field, enter the time-frame.

  12. If you need to start over at any point:
    • If you need to start over at any point:

    • Click Default

Finish Line

Q-See EP

Member since: 12/13/2017

4,309 Reputation

24 Guides authored

2 Comments

What does the equalizer do?

Nevil - Reply

“Reset Equalizer” will set the color settings back to default. The default button below, resets all color settings for the camera.

Q-See -

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 16

Past 30 Days: 43

All Time: 419