Skip to main content

2

by Q-See

  1. Click Start in the Menu Bar
    • Click Start in the Menu Bar

  2. Click Settings
    • Click Settings

  3. Click Encode Parameters in the Record tile.
    • Click Encode Parameters in the Record tile.

  4. Select the recording method to adjust:
    • Select the recording method to adjust:

    • Event Recording Streams: Motion and Alarm Recording

    • Timing Record Stream: Schedule and Manual Recording

  5. To modify the Resolution for multiple cameras at once: Click Resolution
    • To modify the Resolution for multiple cameras at once:

    • Click Resolution

    • Cameras supporting the same resolutions will be grouped.

  6. Click the Resolution dropdown.
    • Click the Resolution dropdown.

    • Select the desired Resolution.

  7. To make changes to a different group of cameras:
    • To make changes to a different group of cameras:

    • Click the Down Caret

  8. Once completed, Click OK
    • Once completed, Click OK

  9. To make changes to a specific camera:
    • To make changes to a specific camera:

    • Click the Resolution dropdown for the specified camera and make a selection.

  10. Once completed, click Apply
    • Once completed, click Apply

  11. To make changes to the Sub Stream (Mobile Viewing Settings):
    • To make changes to the Sub Stream (Mobile Viewing Settings):

    • Click Stream Settings

  12. Changes to the Sub Stream can be made using the same process mentioned in previous steps.
    • Changes to the Sub Stream can be made using the same process mentioned in previous steps.

    • Once completed, click Apply

Finish Line

Q-See EP

Member since: 12/13/2017

4,309 Reputation

24 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 8

Past 30 Days: 61

All Time: 597