Skip to main content

2

by Priti Sharma

Introduction

DEPENDING ON THE MODEL OF YOUR RECORDER YOU WILL NEED ONE OF THE FOLLOWING TO BE ABLE TO RECORD AUDIO:

A CAMERA WITH A BUILT IN MICROPHONE

A MICROPHONE ATTACHED TO THE AUDIO INPUT OF YOUR CAMERA

A MICROPHONE CONNECTED TO THE AUDIO INPUT ON YOUR SYSTEM DIRECTLY

  1. Click Start in the Menu Bar
    • Click Start in the Menu Bar

  2. Click Settings
    • Click Settings

  3. Click Encode Parameters in the Record tile.
    • Click Encode Parameters in the Record tile.

  4. To enable audio on all channels:
    • To enable audio on all channels:

    • Click Audio and Select ON

    • You can enable specific cameras by choosing ON/OFF for each line.

  5. Click Apply
    • Click Apply

  6. Click on Timing Record Stream to enable audio for non-motion recording.
    • Click on Timing Record Stream to enable audio for non-motion recording.

    • Repeat Step 4 and 5 to complete the configuration.

  7. Click Apply
    • Click Apply

Finish Line

Q-See EP

Member since: 12/13/2017

4,410 Reputation

24 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 524