Skip to main content

1

by Priti Sharma

Introduction

THIS GUIDE WILL SHOW YOU HOW TO ADD A DEVICE LOCALLY USING THE BUILT IN "SCAN" TOOL, AND HOW TO ADD A REMOTE DEVICE USING A DDNS.

  1. Open the Play Store on your Android.
    • Open the Play Store on your Android.

  2. Search for QT View
    • Search for QT View

  3. Select Q-See QT View
    • Select Q-See QT View

  4. Press Install
    • Press Install

  5. To download and install QT View, press Accept.
    • To download and install QT View, press Accept.

  6. Once the install has completed, press Open.
    • Once the install has completed, press Open.

  7. Select Skip to bypass the demo screens.
    • Select Skip to bypass the demo screens.

    • Alternatively you can proceed by swiping the screen to view each slide.

  8. Select Start
    • Select Start

  9. If your Android device is connected to the same network as your recorder:
    • If your Android device is connected to the same network as your recorder:

    • Press the My Device drop down.

    • If your Android device is not connected to the same network as your recorder, skip to Step 12 to add your recorder as a Remote device using a DDNS.

  10. Wait a moment while the app scans your local network for devices.
    • Wait a moment while the app scans your local network for devices.

    • Select the IP Address of your device.

  11. Enter a Nickname for your device.
    • Enter a Nickname for your device.

    • Enter the Username and Password for your device.

    • Default: User: admin / Password: 123456

    • Press Play

  12. If you have setup remote access for your recorder by configuring port forwarding and are not connected to the same network as your recorder: Enter the IP or Domain (DDNS) Address in the My Device field.
    • If you have setup remote access for your recorder by configuring port forwarding and are not connected to the same network as your recorder:

    • Enter the IP or Domain (DDNS) Address in the My Device field.

    • Enter a Nickname for your device.

    • Enter the Username and Password for your device.

    • Default: User: admin / Password: 123456

    • Press Play

    • Refer to this EXAMPLE to enter the address correctly.(In Picture 2)

  13. You may be prompted to leave feedback for QT View.
    • You may be prompted to leave feedback for QT View.

    • Select Next time to skip.

  14. Tap the screen once to proceed with the demo screens.
    • Tap the screen once to proceed with the demo screens.

    • Press OK to proceed with the setup.

  15. To change the viewing mode:
    • To change the viewing mode:

    • Select the Viewing Mode icon.

  16. Select to view 1x1, 2x2, 3x3, or 4x4
    • Select to view 1x1, 2x2, 3x3, or 4x4

  17. Double tap a Channel to view 1x1.
    • Double tap a Channel to view 1x1.

    • Rotate your device to view in full screen.

  18. Tap once on the image to reveal the Quality icon.
    • Tap once on the image to reveal the Quality icon.

  19. Select the desired level of Definition.
    • Select the desired level of Definition.

    • Viewing your cameras at a higher definition will require a fast data connection, and will result in higher data usage.

  20. To adjust the Brightness of your Android Phone/Tablet while viewing a camera:
    • To adjust the Brightness of your Android Phone/Tablet while viewing a camera:

    • Slide your finger UP or Down in the left portion of the image.

  21. To adjust the Volume of your Android Phone/Tablet while viewing a camera:
    • To adjust the Volume of your Android Phone/Tablet while viewing a camera:

    • Slide your finger UP or Down in the right portion of the image.

Finish Line

2 other people completed this guide.

Q-See LT

Member since: 12/13/2017

375 Reputation

31 Guides authored

6 Comments

Very good tech professional support..

Ben chico - Reply

Spent several hours trying to install as ip/ddns remote access, with no luck. setup my ddns account through myq-see.com. Still no remote connection. I had the connection several weeks ago but for some reason the remote connection stopped for not reason.

Also, once I setup the connected to same network as DVR, I have to fiddle with the IP address (changing port 85 to 80 then back to 85) to make a connection.

IDEAS?

Bill Kearns - Reply

If I can not see my qsee camera view on my phone on outside my qsee network give me suggestions

Mrugesh B Shah - Reply

if you cannot see off the network, you will need to open the ports for your DVR. QT Series needs ports 85 and 6036 open for the local IP of your DVR.

Priti Sharma -

How change the alarm of camera? Setting of camera

Michel Vallee - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 72

All Time: 9,149