Skip to main content

1

by Priti Sharma

Introduction

THIS GUIDE WILL SHOW YOU HOW TO ADD A DEVICE LOCALLY USING THE BUILT IN "SCAN" TOOL, AND HOW TO ADD A REMOTE DEVICE USING A DDNS.

  1. Open the App Store from your iPhone or iPad.
    • Open the App Store from your iPhone or iPad.

  2. Search for QT View If you are using an iPad you will need to modify the search.
    • Search for QT View

    • If you are using an iPad you will need to modify the search.

    • Change the search from iPad Only to iPhone Only(In Picture 2)

  3. Select Get
    • Select Get

  4. Select Install
    • Select Install

  5. Select Open once the installation is completed.
    • Select Open once the installation is completed.

  6. Select Skip to bypass the demo screens.
    • Select Skip to bypass the demo screens.

    • Alternatively you can proceed by swiping the screen to view each slide.

  7. Select Start
    • Select Start

  8. To add your recorder or camera to the app:
    • To add your recorder or camera to the app:

    • Select OK to proceed.

  9. If your iOS device is connected to the same network as your recorder:
    • If your iOS device is connected to the same network as your recorder:

    • Press the My Device dropdown.

    • If your iOS device is not connected to the same network as your recorder, skip to Step 12 to add your recorder as a Remote device using a DDNS.

  10. Wait a moment while the app scans your local network for devices.
    • Wait a moment while the app scans your local network for devices.

    • Select the IP Address of your device.

  11. Enter a Nickname for your device.
    • Enter a Nickname for your device.

    • Enter the Username and Password for your device.

    • Default: User: admin / Password: 123456

    • Press Play

  12. If you have setup remote access for your recorder by configuring port forwarding and are not connected to the same network as your recorder: Enter the IP or Domain (DDNS) Address in the My Device field.
    • If you have setup remote access for your recorder by configuring port forwarding and are not connected to the same network as your recorder:

    • Enter the IP or Domain (DDNS) Address in the My Device field.

    • Enter a Nickname for your device.

    • Enter the Username and Password for your device.

    • Default: User: admin / Password: 123456

    • Press Play

    • Refer to this EXAMPLE to enter the address correctly.(In Picture 2)

  13. Tap the screen once to proceed with the demo screens.
    • Tap the screen once to proceed with the demo screens.

    • Press OK to proceed with the setup.

  14. To change the viewing mode:
    • To change the viewing mode:

    • Select the Viewing Mode icon.

  15. Select to view 1x1, 2x2, 3x3, or 4x4
    • Select to view 1x1, 2x2, 3x3, or 4x4

  16. Double tap a Channel to view 1x1.
    • Double tap a Channel to view 1x1.

    • Rotate your device to view in full screen.

  17. Tap once on the image to reveal the Quality icon.
    • Tap once on the image to reveal the Quality icon.

  18. Select the desired level of Definition.
    • Select the desired level of Definition.

    • Viewing your cameras at a higher definition will require a fast data connection, and will result in higher data usage.

  19. To adjust the Brightness of your Android Phone/Tablet while viewing a camera:
    • To adjust the Brightness of your Android Phone/Tablet while viewing a camera:

    • Slide your finger UP or Down in the left portion of the image.

  20. To adjust the Volume of your Android Phone/Tablet while viewing a camera:
    • To adjust the Volume of your Android Phone/Tablet while viewing a camera:

    • Slide your finger UP or Down in the right portion of the image.

Finish Line

2 other people completed this guide.

Q-See LT

Member since: 12/13/2017

375 Reputation

31 Guides authored

3 Comments

Thanks for the help

Lester - Reply

I am still getting a “device offline” message when trying to view the cameras from outside of the network. I have made sure that my static ip is entered correctly along with the correct ports. What could be the possible problem? It was working and then stopped working in the last week.

Darpan - Reply

I have the same issue. Was working and now it is not.

Kerry Oubre -

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 43

All Time: 9,504