Skip to main content

v2.0

by Q-See

  1. To prevent the wizard from appearing after each reboot:
    • To prevent the wizard from appearing after each reboot:

    • Uncheck Enable wizard next time.

    • Click on Wizard Setup to begin.

  2. Select the Language for your system.
    • Select the Language for your system.

    • Click Next

  3. Using the On Screen Keyboard, enter the New Password for your system.
    • Using the On Screen Keyboard, enter the New Password for your system.

    • Re-enter the new password in the Confirm Password field.

    • Click Enable to use a Pattern as the default unlock method.

    • Click Edit to create the Pattern.

  4. Click and Hold the Mouse to draw a Pattern.
    • Click and Hold the Mouse to draw a Pattern.

    • You will need to draw the same pattern twice.

  5. Click Edit Security Question to setup the password recovery tool.
    • Click Edit Security Question to setup the password recovery tool.

  6. Enter the security Question you wish to use and the Answer.
    • Enter the security Question you wish to use and the Answer.

    • Click Add

    • Repeat this step to add more questions.

  7. Click OK
    • Click OK

  8. Click Next
    • Click Next

  9. Set your Date and Time:
    • Set your Date and Time:

    • Time Zone References Newfoundland: -03:30 Atlantic Time: -04:00 Eastern Time: -05:00 Central Time: -06:00 Mountain Time: -07:00 Pacific Time: -08:00 Alaska: -09:00 Hawaii: -10:00

    • Click Next

  10. Click Next to proceed with the network setup.
    • Click Next to proceed with the network setup.

  11. Make a note of your Serial Number.
    • Make a note of your Serial Number.

    • The Serial Number will be used to access your system from your mobile devices and computers.

    • Click OK to complete the wizard.

  12. If your hard drive is not formatted the wizard will prompt you to format the drive so you can begin recording.
    • If your hard drive is not formatted the wizard will prompt you to format the drive so you can begin recording.

    • Click OK

  13. Enter the Username and Password from Step 3.
    • Enter the Username and Password from Step 3.

    • Click Format Now

Finish Line

3 other people completed this guide.

Q-See EP

Member since: 12/13/2017

4,309 Reputation

24 Guides authored

One Comment

Very useful document

John Godson - Reply

Add Comment

View Statistics:

Past 24 Hours: 6

Past 7 Days: 18

Past 30 Days: 83

All Time: 886