Skip to main content

v2.1

by Q-See

  1. The Startup Wizard will appear the first time you boot your Q-See Presidio system.
    • The Startup Wizard will appear the first time you boot your Q-See Presidio system.

    • Select your Language

    • Click OK

  2. Q-See recommends you change the password on your system from the default.
    • Q-See recommends you change the password on your system from the default.

    • Default Password: 123456

    • Enter the Default Password

    • If the password has already been changed, enter the current password.

    • Enter the new Password and Confirm below.

    • Click Next

  3. Set your Time Zone and adjust the Date and Time
    • Set your Time Zone and adjust the Date and Time

    • Click Next

  4. Your Local IP will be displayed for your reference.
    • Your Local IP will be displayed for your reference.

    • Click Next

  5. Download the Q-See Presidio App for your mobile device from the app store.
    • Download the Q-See Presidio App for your mobile device from the app store.

    • Scan the QR Code from the wizard to add your NVR to the app.

    • Do not close this screen until you have setup your mobile device.

    • Click HERE to go to the Mobile Setup

    • Click OK to exit the wizard.

Finish Line

2 other people completed this guide.

Q-See

Member since: 09/21/2017

17,793 Reputation

95 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 9

Past 30 Days: 28

All Time: 601