Skip to main content

wps2

by Q-See

Introduction

If you are having issues connecting your QCW Wi-Fi camera to the desired Wi-Fi network, this tutorial will show you how to establish the connection with the help of WPS. WPS does not require configuration to connect compatible devices via Wi-Fi.

  1. Select the X in the top right corner.
    • Select the X in the top right corner.

  2. You will need to be near your  router. Locate the WPS button on your Router
    • You will need to be near your router.

    • Locate the WPS button on your Router

    • Press and hold the WPS Button on your router for 3 seconds.

    • Press the Reset Button on your camera.

    • Do not hold the reset button on the camera.

    • Be Patient. The light on your camera will flash green, and back to red while it connects. Once the Green light is Steady, the connection is successful. This process can take up to 2 minutes.

  3. Select the + in the top right corner to add a device.
    • Select the + in the top right corner to add a device.

  4. Use the camera on your mobile device to:
    • Use the camera on your mobile device to:

    • Scan the QR Code on your camera.

  5. Enter the Password for your camera.
    • Enter the Password for your camera.

    • The default password is admin

    • Select Next

  6. Select your Time Zone to ensure accurate time.
    • Select your Time Zone to ensure accurate time.

    • Select Start Live Preview

Finish Line

One other person completed this guide.

Q-See

Member since: 09/21/2017

15,626 Reputation

94 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 10

Past 7 Days: 29

Past 30 Days: 241

All Time: 2,709