Skip to main content

2

by Q-See

Introduction

QC View is compatible with iPhones and iPads. QC View requires a compatible QC Series Recorder or Camera.

For Scan N' View setup, your Recorder or camera must be connected to an active internet connection.

  1. Open the App Store on your device.
    • Open the App Store on your device.

  2. Select Search
    • Select Search

    • Search for "QC View"

  3. Select "Q-See QC View"
    • Select "Q-See QC View"

    • While QC View HD may be used with iPads, the non HD version, QC View is updated more regularly and provides the best experience.

  4. Select Get to download QC View.
    • Select Get to download QC View.

  5. Once the download and installation is complete, select Open.
Finish Line

2 other people completed this guide.

Q-See

Member since: 09/21/2017

16,850 Reputation

94 Guides authored

4 Comments

How can I view the cameras on my IPad,IPhone or Desk top computer my IP address change and now I can’t view my camera I have the QC view app on my mobile devices my IP address is 108.248.140.42

Michael Preston - Reply

Michael,

IT may be easier for you to contact our support team @ 877-998-3440. This seems like an issue of a dynamic IP changing, and could require the use or IP Reservations or setting a Static IP for your system. Alternatively, you could have a system that supports Scan N View, especially if it was purchased in the last 2 years. A Scan N View device would not require using an IP address.

Best Regards,

Q-See -

I can view live video remotely or on the NVR, but the “filmstrip” icon on the results in a message of “no record” and the NVR seems to have no recorded video. I have reset the camera settings to default with no luck. What am I missing?

Also, the app is really not intuitive. Many of the symbols make no sense. It would be really helpful if there was some way to get labels to appear, perhaps click and hold to get an explanation of what the feature is.

Steve Hajewski - Reply

In the QC View app, tap the 3 lines in the top left corner, at the very bottom, go to “Setting”. Then go to “Help”. In the Help section there are icon definitions and descriptions of functions.

Q-See -

Add Comment

View Statistics:

Past 24 Hours: 12

Past 7 Days: 93

Past 30 Days: 342

All Time: 5,579